Features
RGB - Tri Color LED Flexible Ribbon Strip Tape
Easy to install, powered by 12 Volt DC power source.
Can be separated in every 3 LEDs along the cut-edge (approx. 4 inches)
Made of a flexible white printed circuit board with self adhesive 3M tape
Available in various colors: red, yellow, blue, green, white, warm white and RGB
Standard length: 5 meters (16.4ft) reel
Strip width: single color 10mm, Color of PCB: White
Color: Red/Green/Blue, Tri-Color - RGB Controller recommended
Dimentions: 0.25mm, 0.2mm, 500mm
Working voltage: 12 Volt DC
LED quantity of entire strip: RGB 150 pcs, single color 300 pcs
Lifespan (approx. 100,000 hours)
Wattage: 8.2 watts per Meter; 41 Watts per spool
Rustproof (IP 64- Waterproof Version Available)
Impact resistant, conforms to irregular surfaces, super flexible and low profile
LED RGB Remote Controller
Control LED RGB devices up to 100 watts with our Remote LED Controller. The unit has 16 built-in programs for flashing/sequencing your LEDs. There is also control over the speed of color changing levels of the LEDs.
This unit or the D100 unit are both excellent choices for automotive LED lighting or any other 12-24v DC lighting application. Manual buttons on the unit or RF Remote control and easy operation. Mini terminal screws for your (R)ed,(G)reen,(B)lue and (C)ommon leads; spring clip connectors for your 12vDC or 24vDC input. Screw tabs on the CPU box for easy mounting.
12vDC Power Supply NOT INCLUDED. Please use a 40watt or larger Power Supply to power your system.
|
