Features & Benefits:
Our LED T10 Light Tube consists of high quality SMD LEDs and can emit a higher brightness at much lower cost. Surface Mount LEDs transfer heat better and are a better solution for longevity.
Our LED T10 tube Light can be easily installed like a conventional fluorescent light into the existing sockets. Ballast is removed/bypassed one time and you enjoy more energy savings.
With very little heat output, proper drive characteristics and high quality LEDs, our LED T10 Fluorescent Light Tube has a lifetime of up to 100,000 hours. These are the highest quality tube lights available on the market today - You get what you pay for.
Multiple Pin Configurations
Our SMD LED Fluorescent Tube Light Retrofit allows for many different style Pin/End Configurations! We offer the standard "Medium Bi-Pin", R17D (High Output Connection), Single Pin, or the NEW indexed/Rotating End caps (pictured), which allow 90 degree rotation in a multitude of different socket/tombstone configurations!
Multiple Lens Options!
We offer a crystal clear poly-carbonate lens, a semi-frosted lens (Light Emitting Diodes are still visible), or a completely frosted (similar diffusion to a traditional fluorescent tube light) lens!
The LED T8 Tube is manufactured under ROHS, contains no MERCURY, Emits NO RF interference!!
With IP54 degree protection, our LED T10 Tube Light can operate normally even in a indoor environment. Can operate in moist environments in 'seal-tight' fixtures.
Our LED T10 Tube Lights consume power from 8W to 18W. This saves much more energy than conventional fluorescent T8 light tubes. By just retrofitting your existing fixtures, you'll enjoy a 55%+ electrical savings!
The LED T10 Tube Fluorescent Light is completely enclosed. The LEDs are surrounded by a Clear or Frosted acrylic lens and emit light like a conventional T-series fluorescent light. Our LED T8 Tube is typically used for lighting in Retail, Warehouses, Garages, Basements, Task Lighting, Store Displays, General Lighting, RVs, Buses, Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere you have a T8/T12 series fixture! Yes, we offer DC voltage tube lights for your Solar or Mobile applications!
Available in four different color temperature renderings:
Warm White: 3700 Kelvin*; ~ 1700 lumens - Yellowish Light
Natural White: 4200 Kelvin*; ~ 1750 lumens - Natural White Light
Daylight White: 5500 Kelvin*; ~ 1800 lumens - Pure White
Cool White: 7000 Kelvin*; ~ 1850 lumens - Bluish Light
Aluminum heat sink, 290 High Brightness LED's, available in Warm White, Natural White, Day White or Cool White, No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescent . No mercury, no ballast required, wide voltage and constant current design, solid state, high shock & vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, This product is cULus/cETLus Approved. The products are also in accordance with UL, CE and FCC testing standards. Retro-fit kits available for direct replacement of fluorescent fixtures.
*We have a +/- tolerance of 500 kelvin on our batched products. (all Kelvin estimates are just that, estimates).
** Removal of the ballast and started in the fixture are required. Please see our product support section for important information and details on removing the ballast in your fixtures.