Features & Benefits:
Our DLC LED T10 Tube Light consists of high quality SMD LEDs and can emit a higher brightness at much lower cost. Surface mount LEDs transfer heat better and are a better solution for longevity, low power consumption and minimal heat.
Our DLC LED T10 tube Light can be easily installed like a conventional fluorescent light into the existing sockets. Ballast is removed/bypassed one time and you enjoy more energy savings. DLC requires 3 Lamps (Sold Individually) "kit" to be DLC approved.
With very little heat output, proper drive characteristics and high quality LEDs, our DLC LED T10 Fluorescent Light Tube has a lifetime of up to 50,000 hours. These are the highest quality tube lights available on the market today - You get what you pay for.
Our DLC SMD LED Fluorescent Tube Light Retrofit allows for the standard "Medium Bi-Pin" (G13). Fixed Bi-Pin End caps Only.
Multiple Lens Options!
We offer a Full Frosted (similar diffusion to a traditional fluorescent tube light) poly-carbonate lens, a semi-frosted lens (Light Emitting Diodes are still visible), or a completely Clear lens!
The DLC LED T10 Tube is manufactured under Strict DLC Specifications, contains no MERCURY, Emits Less than 15% RF interference and is UL Approved!!
With IP50 degree protection, our DLC LED T10 Tube Light can operate normally even in a indoor environment. Can operate in moist environments in 'seal-tight' fixtures.
Our DLC LED T10 Tube Lights consume power from 8W to 18W. This saves much more energy than conventional fluorescent T8/T12 light tubes. By just retrofitting your existing fixtures, you'll enjoy a 55%+ electrical savings!
The DLC LED T10 Tube Fluorescent Light is completely enclosed. The LEDs are surrounded by a Clear or Frosted acrylic lens and emit light like a conventional T-series fluorescent light. Our DLC LED T10 Tube is typically used for lighting in Retail, Warehouses, Garages, Basements, Task Lighting, Store Displays, General Lighting, RVs, Buses, Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere you have a T8/T12 series fixture! Yes, we offer DC voltage tube lights for your Solar or Mobile applications!
Available in four different color corrected temperature renderings:
Warm White: 3000 Kelvin*; ~ 1800 lumens - Warm 'Incandescent' Light
Natural White: 4000 Kelvin*; ~ 1850 lumens - Yellowish White Light
Daylight White: 5000 Kelvin*; ~ 1900 lumens - Pure White
Aluminum heat sink, 110 High Brightness LED's, available in Warm White (30x), Natural White(40x) or Day White(50x), No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescent . No mercury, no ballast required, wide voltage and constant current design, solid state, high shock & vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, This product is cULus/cETLus Approved. The products are also in accordance with UL, CE and FCC testing standards. Retro-fit kits available for direct replacement of fluorescent fixtures.
Item Number: CL-SMDT10-4-18W290-UL 3 Lamps Kit ---- To be installed in 2x4 foot Retrofit troffer - Items as a family group:
CL-SMDT10-4-18W290-UL (30C/40C/50C) 3 Lamps Kit (Sold Individually)
CL-SMTT10-4-18W290-UL (30S/40S/50S) 3 Lamps Kit (Sold Individually)
CL-SMDT10-4-18W290-UL (30F/40F/50F) 3 Lamps Kit (Sold Individually)
*** Mark: 30 is CCT 3000K. 40 is CCT 4000K. 50 is CCT 5000K.
Cover(x): C is Clear lens. S is Semi-frosted lens. F is Frosted lens.
*We have a +/- tolerance of 300 kelvin on our batched products. (all Kelvin estimates are just that, estimates).
** Removal of the ballast and started in the fixture are required. Please see our product support section for important information and details on removing the ballast in your fixtures.