 |
 |
 |
 |
|
 |
|
Features
|
Input Voltage |
90 ~ 264Vac |
|
Input Frequency |
47 ~ 63Hz |
|
Power Factor |
PF>0.9/230Vac PF>0.98/115Vac at full load |
|
Input Current |
0.8A/115Vac 0.4A/230Vac |
|
Inrush Current |
40A/230Vac |
|
Leakage Current |
0.5mA/240Vac |
|
O/P Current Adjustment Range |
3% ~ -25% |
|
Voltage Tolerance |
±10% |
|
Line Regulation |
±4.0% |
|
Load Regulation |
±10% |
|
Set Up, Rise Time |
1500ms, 100ms / 230Vac 3000ms, 100ms/115Vac at full load |
|
Over Current Protection |
Constant current limiting, recovers automatically after fault condition is removed |
|
Short Circuit Protection |
Hiccup mode, recovers automatically after fault condition is removed. |
|
Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
|
Over Temperature Protection |
95°C ±10°C (TSW1) Detect on heatsink of power transistor |
|
Working Temperature |
-30°C ~ +60°C (Refer to output load derating curve) |
|
Working Humidity |
20 ~ 90% RHnon-condensing |
|
Storage Temperature, Humidity |
-40°C ~ +80°C 10 ~ 95% RH |
|
Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
|
Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for60min. each along X,Y, Z axes |
|
Withstand Voltage |
I/P-O/P:4.25KVDC |
|
Isolation Resistance |
I/P-O/P:100M Ohms/500VDC |
|
Safety Standards |
UL1310 Class 2, CAN/CSAC22.2 No. 223-M91(except for 48V), IP64 Approved |
|
EMC |
Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3 |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, Criteria A |
|
MTBF |
497.8Khrs min. MIL-HDBK-217F (25°C)
|
|
|
|
|
|
|
|
|
|
