Features & Benefits:
LED T8/T10 Light Tube consists of high quality SMD LEDs and can emit a
higher brightness at much lower cost. Surface Mount LEDs transfer heat
better and are a better solution for longevity.
LED T10 tube Light can be easily installed like a conventional
fluorescent light into the existing sockets. Ballast is
removed/bypassed one time and you enjoy more energy savings.
very little heat output, proper drive characteristics and high quality
LEDs, our LED T10 Fluorescent Light Tube has a lifetime of up to 100,000
hours. These are the highest quality tube lights available on the
market today - You get what you pay for.
Multiple Pin Configurations
SMD LED Fluorescent Tube Light Retrofit allows for many different style
Pin/End Configurations! We offer the standard "Medium Bi-Pin", R17D (High Output Connection),
Single Pin, or the NEW indexed/Rotating End caps (pictured), which
allow 90 degree rotation in a multitude of different socket/tombstone
Multiple Lens Options!
We offer a crystal clear poly-carbonate lens or a semi-frosted lens (Light Emitting Diodes are still visible).
The LED T8 Tube is manufactured under ROHS, contains no MERCURY, Emits NO RF interference!!
IP54 degree protection, our LED T10 Tube Light can operate normally
even in a indoor environment. Can operate in moist environments in
Our LED T10 Tube
Lights consume power from 8W to 40W. This saves much more energy than
conventional fluorescent T8 light tubes. By just retrofitting your
existing fixtures, you'll enjoy a 55%+ electrical savings!
The LED T10 Tube Fluorescent Light
is completely enclosed. The LEDs are surrounded by a Clear or Frosted
acrylic lens and emit light like a conventional T-series fluorescent
light. Our LED T8/T10/T12 Tube is typically used for lighting in Retail,
Warehouses, Garages, Basements, Task Lighting, Store Displays, General
Lighting, RVs, Buses, Under Cabinets, Storage Facilities, Generator
Powered Remote Sites, Cold Storage, Solar Installations and more. It can
be used anywhere you have a T8/T12 series fixture! Yes, we offer DC
voltage tube lights for your Solar or Mobile applications!
Available in four different color temperature renderings:
Warm White: 3500 Kelvin*; ~ 3400 lumens - Yellowish Light
Natural White: 4100 Kelvin*; ~ 3450 lumens - Natural White Light
Daylight White: 5500 Kelvin*; ~ 3500 lumens - Pure White
Cool White: 7000 Kelvin*; ~ 3550 lumens - Bluish Light
Aluminum heat sink, 580 High Brightness LED's, available in Warm
White, Natural White, Day White or Cool White, No UV or RF interference,
Patented heat sink and optical diffuser, longer life than incandescent
& fluorescent . No mercury, no ballast required, wide voltage and
constant current design, solid state, high shock & vibration
resistant, Mercury free, 50%+ savings in energy consumption, quite, no
noise, no flickering, This product is cULus/cETLus Approved. The
products are also in accordance with UL, CE and FCC testing standards.
Retro-fit kits available for direct replacement of fluorescent fixtures.
*We have a +/- tolerance of 500 kelvin on our batched products. (all Kelvin estimates are just that, estimates).
** Removal of the ballast and started in the fixture are required. Please see our product support section for important information and details on removing the ballast in your fixtures.