Features
Features & Benefits:
High Brightness
Our Upgraded LED T8/T10 Light Tube consists of high quality SMD LEDs and can emit a higher brightness at much lower cost.
Easy Installation
Our LED T8/T10 tube Light can be easily installed like a conventional T8 fluorescent light into the existing sockets. Ballast is removed/bypassed one time and you enjoy more energy savings. Our NEW Rotating End caps allow easy installation into fixtures that have non-standard or canted tombstones.
Extended Life
With very little heat output, proper drive characteristics and high quality LEDs, our LED T8/T10 Fluorescent Light Tube has a lifetime of up to 100,000 hours. These are the highest quality tube lights available on the market today - You get what you pay for.
The LED T8 / T10 Tube is manufactured under ROHS, contains no MERCURY, Emits NO RF interference!!
Humidity/Moisture Resistant
With IP54 degree protection, our LED T8/T10 Tube Light can operate normally even in a indoor environment. Can operate in moist environments in 'seal-tight' fixtures.
Energy Saving!
Our LED T8/T10 Tube Lights consume power from 8W to 18W. This saves much more energy than conventional fluorescent T8/T10 light tubes. By just retrofitting your existing fixtures, you'll enjoy a 55%+ electrical savings!
The LED T8/T10 Tube Fluorescent Light is completely enclosed. The LEDs are surrounded by a Clear or Frosted acrylic lens and emit light like a conventional T-series fluorescent light. Our LED T8 Tube is typically used for lighting in Garages, Basements, Task Lighting, Store Displays, General Warehouse Lighting, RVs, Buses, and Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere you have a T8 series fixture!
Available in four different color temperature renderings:
- Warm White: 3700 Kelvin; ~ 1750 lumens - Yellowish Light
- Natural White: 4500 Kelvin; ~ 1800 lumens - Natural White Light
- Daylight White: 5500 Kelvin; ~ 1850 lumens - Pure White
- Cool White: 7000 Kelvin; ~ 1900 lumens - Bluish Light
UPGRADED:
Aluminum heat sink, 290 LED's, available in Warm White, Natural White, Day White or Cool White, No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescent . No mercury, no ballast required, wide voltage and constant current design, solid state, high shock & vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, This product is CE/ROHS Approved. The products are also in accordance with CE, UL and FCC testing standards. Retro-fit kits available for direct replacement of fluorescent fixtures. ** Removal of the ballast and started in the fixture are required. Please see our product support section for important information and details on removing the ballast in your fixtures.
|
