16 Built in Color Programs - RF Remote Control Capable

The V-100 controller can be powered with 12v-24v DC. Our V-100 controller can run a maximum off 1A of LED products at 12vDC or 1.2A of LED products at 24vDC.

The V-100 has a two character display. The first character is the program, i.e.- 1,2,3.....d,e,f) whereas the second character is the speed of the color changing or pattern change.

The program is as follows: [First Character or MODE]

1 - BLUE - Static Color
2 - GREEN - Static Color
3 - RED - Static Color
4 - TEAL - Static Color
5 - PINK - Static Color
6 - YELLOW - Static Color
7 - WHITE - Static Color
8 - Blue/Green/Red - Color Changing; Speed: 0-9
9 - Blue/Green/Red/Teal/Pink/Yellow - Color Changing; Speed: 0-9
A - Teal/Yellow/Pink - Fade between colors; Speed: 0-9
B - Blue/Green/Red/Teal/Pink/Yellow - Fade between colors; Speed: 0-9
C - Full 16 Million color fade - Speed: 0-9
D - Blue - Static Color Fade Up/Down; Speed: 0-9
E - Green - Static Color Fade Up/Down; Speed: 0-9
F - Red - Static Color Fade Up/Down; Speed: 0-9
H - White - Static Color Fade Up/Down; Speed: 0-9