We only offer the Highest Quality Commercial Grade LED Lighting!

Request a Catalog




Click to +1 CLS!







  Home > Led Light Bulbs > T8 LED Fluorescent Replacement Tubes >

12V LED SMD T8 Tube Light, 4 foot Day White, 17W, 300 LED
LED SMD T8 Tube Light - 1550 Lumens, 4 foot, Day White, 17 Watt, 300 LED, 12-24VDC, Clear Lens, Commercial Grade


 
List Price: $49.95
Our Price: $39.95
You save $10.00!

Quantity in Stock:(Out of Stock)
Availability:: See the NEW T10 12/24VDC Unit In Stock
Product Code: CL-SMDT8-4-DW17W300-12V
Qty:



The following items are included with this product bundle:

Description Technical Specs
 
12-24vDC LED Tube Light!  Closest color temp as traditional fluorescent. Try a few and you'll see our quality and performance!
Features
Features & Benefits:
12 - 24VDC / Low Voltage Units!  Great for Solar, Battery, RV, Wind, etc.
NEW: Upgraded T10 Unit available HERE

High Brightness
Our LED T8 Light Tube consists of high quality SMD LEDs and can emit a higher brightness at much lower cost.  Surface Mount LEDs transfer heat better and are a better solution for longevity.

Easy Installation
Our LED T8 tube Light can be easily installed like a conventional T8/T12 fluorescent light into the existing sockets.  Ballast is removed/bypassed one time and you enjoy more energy savings.

Extended Life
With very little heat output, proper drive characteristics and high quality LEDs, our LED T8 Fluorescent Light Tube has a lifetime of up to 100,000 hours.  These are the highest quality tube lights available on the market today - You get what you pay for.

The LED T8 Tube is manufactured under ROHS, contains no MERCURY, Emits NO RF interference!!


Humidity/Moisture Resistant
With IP54 degree protection, our LED T8 Tube Light can operate normally even in a indoor environment.  Can operate in moist environments in 'seal-tight' fixtures.

Energy Saving!
Our LED T8 Tube Lights consume power from 7W to 40W. This saves much more energy than conventional fluorescent T8 light tubes.  By just retrofitting your existing fixtures, you'll enjoy a 55%+ electrical savings!
 
The LED T8 Tube Fluorescent Light is completely enclosed. The LEDs are surrounded by a Clear or Frosted acrylic lens and emit light like a conventional T-series fluorescent light. Our LED T10 Tube is typically used for lighting in Garages, Basements, Task Lighting, Store Displays, General Warehouse Lighting, RVs, Buses,  and Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere you have a T8 or T12 series fixture! 

Available in four different color temperature renderings:

    Warm White:      3700 Kelvin*; ~ 1450 lumens  - Yellowish Light
    Natural White:    4200 Kelvin*;  ~ 1500 lumens  - Natural White Light
    Daylight White:   5500 Kelvin*; ~ 1550 lumens  - Pure White
    Cool White:        7000 Kelvin*; ~ 1600 lumens  - Bluish Light

  • No Hum or Buzz
  • Instant Start; No Flickering
  • ROI - 18 to 24 months (even quicker with increasing electric rates!)
  • Patented Power Rectifier - Will not inject RF interference onto the power line.  Excellent for X-10 or other power line Home Automation installations!
  • Patented Aluminum extruded backing heat sink in aluminum
  • Clear Lens
  • Limited Manufacturer 3 year Warranty 
Aluminum heat sink, 300 LED's, available in Warm White, Natural White, Day White or Cool White, No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescent . No mercury, no ballast required, wide voltage and constant current design, solid state, high shock & vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, This product is produced according to approval standards.  The products are also in accordance with UL, CE and FCC testing standards. Retro-fit kits available for direct replacement of fluorescent fixtures.

*We have a +/- tolerance of 500 kelvin on our batched products. (all Kelvin(tm) estimates are just that, estimates).

** Removal of the ballast and started in the fixture are required.  Please see our product support section for important information and details on removing the ballast in your fixtures.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Led Light Bulbs > T8 LED Fluorescent Replacement Tubes
Commercial LED Lighting - LED Tube Lights T8 T12
Commercial LED Lighting - LED Tube Lights T8 T12 > CreativeLightings Led Tube Lights - LED T8 & T12 Tubes
Led Light Bulbs